Industrial door opener SG50/100
Innovator The opener can be installed at any angle without adjust the haulage chain device.
1. Speed reducer with Die-casting aluminum alloy, durable and beauty.
2. Self-locking which will prevent the door falling itself.
3. SG50/100 equipped with release structure for unlock the door if emergency occurs. The release key is made of cast steel, which is strong enough for long time use.
4. With manual operating haulage chain device on-site adjustment is unnecessary. chain device is connected with safety switch, when the chain is released the safety switch will return back;
5. The opener can be installed at any angle without adjust the haulage chain device.
6. Journey structure is circulatory; journey switch will not be pressed by installation, adjustment or manual release by chain.
7. Interface units for protective devices are available
8. Fault checking and rebound (the door will stop or rebound when it meets obstacle) function give more security to you.
9. Soft starting and stopping will deduct the impact to opener that caused by the door, then the service life of the opener is extended.
10. Integrated controller and receiver.
Parameter
Rated voltage |
AC 220 V 50Hz/AC 380V 50Hz |
Power |
500W/750W |
Speed |
1400rpm |
Reduction ratio |
1:62 |
Output torque |
50 /100 N.m |
Output rotate speed |
22.5 rpm |
Output shaft diameter |
25.4 mm |
frequency |
433.92 MHz |
IP |
IP44 |
Circumstance temperature |
-25℃ +55℃ |